DIGITAL INCLUDES
Features:
- Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available)
- OEM Integration - installs in your vent for a sleek install while retaining air flow
- Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
- Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly
P3 V3 Gauge Readouts:
- Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
- Coolant temperature
- Air/Fuel ratio (can be read in AFR or Lambda)
- Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
- Intake air temperature
- Throttle angle
- Ignition timing
- Engine RPM
- Exhaust gas temperature
- Battery voltage
- Programmable shift light
- Analog input 1 (Brown wire) can allow gauge to read any 0-5 volt linear output sensor
- Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
- Acceleration timers (0-60mph/0-100mph/60-130mph)
- Braking timers (60-0mph/100-0mph)
ANALOG INCLUDES
More than just a simple boost gauge, the P3 Analog incorporates an intelligent design that fits in perfectly with your BMWs interior. This is the perfect solution for anyone looking to extend the visibility of the factory engine monitoring display without the need for obtrusive gauges or a mounted tablet. The analog boost display is coupled with two analog inputs and a battery voltage display giving you the most vital information at your fingertips with the press of a button. All this in an attractive package that appears as if it was installed in the factory.
Further bolstering an already stellar set of features is the upgradeability of this system. A simple wiring harness change and control box will transform your P3 Analog into full V3 OBD2 trim with all of the features and control options included.
This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
4 Available Readouts:
- Analog boost (yellow/purple/black - a dedicated plug for analog boost sensor) *boost tap not included
- Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
- Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
- Battery voltage (red wire / black wire - read through power and ground wires)
Analog gauge base kit includes
- Integrated display
- Analog Box control unit
- Main harness
- Hard-wire harness
- Analog boost sensor *boost tap not included
- Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
- 3 zip ties
- 2 Scotchlok wire taps
340
340i
335
335i
328
328i
440
440i
m340
m340i
240
240i
m240
m240i
f80
f80 m2
f82
f82 m4
f83
f83 m3